Oil Filter Decal Fram Attached Warning
NEW HIRE RESOLUTION GRAPHIC!
Oil Filter Decals
(includes Lid a Side Inlet Decals for full restoration)
(OUTSIDE MOUNT ONLY)
Circa 1940s – Complete set
How to Apply your Decal: Our decals are pretty easy to apply. Simply trim the decal making sure that any white showing around the graphic is removed or is evenly spaced from the graphics edge. Clean the glass surface you wish to apply the decal to. You can use window cleaner but if you have one an alcohol or computer screen wipe is perfect.
Drop the decal into warm water and watch it curl then relax. Take this time to wet the surface you are planning to apply the decal to. After about 20-30 second remove the decal from the water. It should slide around freely on the backing paper. Slide it sideways off the backing paper and onto the wet surface. Make sure to not stretch or fold the decal as you apply it. Take your wet finger and work out from the center lightly pressing out any bubbles. Taking a dry towel, you are welcome to dab off any extra water. (do not slide, just dab) Let dry for 20-30 min.
If the decal is an outside mount, I recommend once dry to spray a clear coat over the decal to seal it from water and engine heat. A couple coats of any common house hold clear or matte spray can should do the trick.