NEW HIRE RESOLUTION GRAPHIC!
Oil Filter Decals
(includes Lid a Side Inlet Decals for full restoration)
(OUTSIDE MOUNT ONLY)
Circa 1940s – Complete set
How to Apply your Decal: Our decals are pretty easy to apply. Simply trim the decal off the sheet making sure that any white showing backing around the graphic is removed or evenly spaced from the graphics edge. Clean the surface you wish to apply the decal to. Drop the decal into warm water and watch it curl then relax. Take this time to wet the surface you are planning to apply the decal to. After about 20-30 second remove the decal from the water and slide it sideways off the backing paper and onto the surface. Make sure to not stretch or fold the decal as you apply it. Take your wet finger and work out lightly any bubbles. Taking a dry towel you are welcome to dab off any extra water. Let dry for 30-40 min. I recommend once dry to spray a clear coat over the decal to seal it from water and engine heat. A couple coats of a common house hold clear or matt spray can should do the trick.